Exploració per tema "Nanocomposites (Materials)"
Ara es mostren els items 46-65 de 145
-
Enhanced electromagnetic interference shielding effectiveness of polycarbonate/graphene nanocomposites foamed via 1-step supercritical carbon dioxide process
(2016-01)
Article
Accés obertThe dielectric and electromagnetic interference (EMI) shielding properties of polycarbonate/graphene nanocomposites foamed using supercritical carbon dioxide were studied as a function of their cellular and compositemorphology. ... -
Enhancing the electrical conductivity of polyetherimide-based foams by simultaneously increasing the porosity and graphene nanoplatelets dispersion
(2018-09-19)
Article
Accés obertSignificant improvement in electrical conductivity of graphene nanoplatelets-filled polyetherimide (PEI) foams was achieved by simultaneously increasing the porosity and graphene nanoplatelets dispersion. Foams were prepared ... -
Environmentally-safe catalytically active and biocide polymer-metal nanocomposites with enhanced structural parameters
(INTECH, 2011)
Capítol de llibre
Accés obert -
Epoxy sol-gel hybrid thermosets
(MDPI AG, 2016-02-03)
Article
Accés obertSol-gel methodologies are advantageous in the preparation of hybrid materials in front of the conventional addition of nanoparticles, because of the fine dispersion of the inorganic phase that can be reached in epoxy ... -
Estudio de nanocompuestos derivados del nylon 47
(Universitat Politècnica de Catalunya, 2010-01-11)
Projecte/Treball Final de Carrera
Accés obertL'objectiu d'aquest Projecte és l'estudi de la cristal·lització del nylon 47 i dels nanocomposites del polímer amb argiles modificades orgànicament. Els primers treballs relacionats amb la preparació de nanocomposites a ... -
Estudio sobre la incorporación de materiales nanoestructurados de celulosa como material de refuerzo para la mejora de las propiedades de resistencia de los recubrimientos de soportes celulósicos
(Universitat Politècnica de Catalunya, 2020-01-29)
Projecte Final de Màster Oficial
Accés obert -
Evaluation of the bulk and alpha-case layer properties in Ti-6Al-4V at micro- and nano-metric length scale
(WILEY, 2016)
Capítol de llibre
Accés restringit per política de l'editorialIn the present study the hardness of individual alpha ( )-Ti grains in Ti-6Al-4V was measured by nanoindentation using Berkovich tip indenter. Additionally, alpha-case layer was induced by performing isothermal heat ... -
Experimental study of preparation and characterization of a PLA-based multifunctional nanocomposite material
(Universitat Politècnica de Catalunya, 2017-06-10)
Treball Final de Grau
Accés restringit per decisió de l'autorPolymer-clay nanocomposite materials are relatively mature and widely studied. However, reaching high levels of clay nano platelets dispersed within the material is still a pending matter which, in the event of achieving ... -
Exploiting metallophilicity for the assembly of inorganic nanocrystals and conjugated organic molecules
(2016-07-18)
Article
Accés obertThe accurate engineering of interfaces between inorganic nanocrystals and semiconducting organic molecules is currently viewed as key for further developments in critical fields such as photovoltaics and photocatalysis. ... -
Fuzzy logic modeling of Pb (II) sorption onto mesoporous NiO/ZnCl2-Rosa Canina-L seeds activated carbon nanocomposite prepared by ultrasound-assisted co-precipitation technique
(2018-01-01)
Article
Accés obertIn this study, NiO/Rosa Canina-L seeds activated carbon nanocomposite (NiO/ACNC) was prepared by adding dropwise NaOH solution (2 mol/L) to raise the suspension pH to around 9 at room temperature under ultrasonic irradiation ... -
Graphene nanoplatelets-reinforced polyetherimide foams prepared by water vapor-induced phase separation
(2015-05)
Article
Accés restringit per política de l'editorialThe present work considers the preparation of medium-density polyetherimide foams reinforced with variable amounts of graphene nanoplatelets (1–10 wt%) by means of water vapor-induced phase separation (WVIPS) and their ... -
Highly exfoliated nanostructure in trifunctional epoxy/clay nanocomposites using boron trifluoride as initiator
(Wiley, 2014-03-15)
Article
Accés obertEpoxy/clay nanocomposites based upon a trifunctional epoxy resin, triglycidyl p-amino phenol (TGAP), have been prepared by intercalating an initiator of cationic homopolymerization, a boron trifluoride monoethylamine ... -
Hybrid polythiophene-clay exfoliated nanocomposites for ultracapacitor devices
(2012-06-14)
Article
Accés restringit per política de l'editorialExfoliated nanocomposites of poly(3,4-ethylenedioxythiophene) (PEDOT) and montmorillonite (MMT) have been prepared by in situ anodic polymerization, concentrations of clay ranging from 5% w/w to 50% w/w being included ... -
Hydrogen photoproduction from ethanol-water mixtures over Au-Cu alloy nanoparticles supported on TiO2
(2015-03-01)
Article
Accés obertAu/TiO2, Au0.75Cu0.25/TiO2, Au0.5Cu0.5/TiO2 and Au0.25Cu0.75/TiO2 photocatalysts prepared from pre-formed Au and Au-Cu alloy nanoparticles of controlled composition and size were loaded over ceramic honeycombs (2 mg cm(-2)) ... -
Improving filmogenic and barrier properties of nanocellulose films by addition of biodegradable plasticizers
(2021-07-14)
Article
Accés obertCellulose nanocrystals (CNCs) were mixed with various additives to obtain films with good barrier and mechanical properties as replacements for petroleum-based plastics. The influence of different doses of additives including ... -
Improving glass-fiber epoxy composites via interlayer toughening with polyacrylonitrile/multiwalled carbon nanotubes electrospun fibers
(Wiley, 2022-11)
Article
Accés obertThe development of innovative engineered epoxy composites aiming to manufacture cost-efficient materials with reduced weight and enhanced physical properties remains as a current industrial challenge. In this work we report ... -
In-situ direct synthesis of HKUST-1 in wool fabric for the improvement of antibacterial properties
(Multidisciplinary Digital Publishing Institute (MDPI), 2019-04-19)
Article
Accés obertThe use of Metal-Organic Frameworks (MOF) such as HKUST-1 in textiles is an alternative with regard to the development of technologies that are increasingly seeking for functionalities, mainly in the fields of health and ... -
In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy
(2019-01-01)
Article
Accés obertPrior to friction stir welding (FSW), silicon carbide (SiC) nanopowders were placed inside the groove on the adjacent side of magnesium sheet. In order to make a good distribution of these nanoparticles, first, friction ... -
Influence of chemical composition of Brazilian organoclays on the morphological, structural and thermal properties of PLA-organoclay nanocomposites
(2019-07-17)
Article
Accés restringit per política de l'editorialThe effects of adding different Brazilian organoclays, containing di-(hydrogenated tallow) dimethyl ammonium chloride (HTA), trihexyl tetradecyl phosphonium chloride (TDP), di(alkyl ester) dimethyl ammonium chloride (EA) ... -
Influence of chitosan characteristics in the microencapsulation of essential oils
(Springer, 2021-03)
Article
Accés obertThe fight against nosocomial infections in hospitals, has promoted the use of microencapsulated essential oils on medical wearing uniforms. These types of microcapsules can be improved with the use of antimicrobial polymers ...