• Design of Low Noise Readout Amplifiers for Monolithic Capacitive CMOS-MEMS Accelerometers 

    Sánchez Chiva, José María (Universitat Politècnica de Catalunya, 2014-09-09)
    Projecte Final de Màster Oficial
    Accés obert
    [ANGLÈS] This thesis report describes the design process, the implementation and the simulation and measurement results of two different readout circuits to be used with two monolithic MEMS accelerometers fabricated by ...
  • Disseny VHDL de la unitat de control d'un acceleròmetre 

    Casulleras Romero, Albert (Universitat Politècnica de Catalunya, 2013-05-28)
    Projecte/Treball Final de Carrera
    Accés obert
    [ANGLÈS] An accelerometer is an instrument that calculates acceleration forces, using his inertial movement towards some known coordinates. There are quite a few technologies and designs and all of them have as a prime ...
  • Full custom design of a TDC core for laser rangefinder application 

    Matallana Espinar, Carlos (Universitat Politècnica de Catalunya, 2014-09-09)
    Projecte/Treball Final de Carrera
    Accés obert
    [ANGLÈS] A topology to implement a time-to-digital converter in 130 nm technology for a laser rangefinder application is proposed in this work. Its architecture comprises a delay line as a fine measurement and a synchronous ...
  • Measurement device for cmos-mems accelerometer 

    Somasundaram, Namitha (Universitat Politècnica de Catalunya, 2014-06-06)
    Projecte/Treball Final de Carrera
    Accés obert
    [ANGLÈS] This project reports the process of development of the Printed Circuit Board (PCB) - Zephyr for the experimental CMOS MEMS accelerometer testchip, Bailed II. The problem of capacitance mismatch at the input bridge ...
  • Sistema de mesura d'acceleròmetres basat en altaveu 

    Ponce Garcia, Bernat (Universitat Politècnica de Catalunya, 2015-05-11)
    Projecte/Treball Final de Carrera
    Accés obert
    [ANGLÈS] The Electronic Engineering Department is developing an accelerometer and, in order to check the reliability of its functionality, it is needed to create a system capable of generating vibrations that will make ...