Exploració per autor "Reyes Pozo, Guillermo"
Ara es mostren els items 1-6 de 6
-
A hybrid numerical-experimental strategy for predicting mechanical response of components manufactured via FFF
Dialamishabankareh, Narges; Chiumenti, Michele; Cervera Ruiz, Miguel; Chasco Goñi, Uxue; Reyes Pozo, Guillermo; Pérez Martínez, Marco Antonio (2022-10)
Article
Accés obertIn this paper a new methodology developed for predicting the mechanical performance of the structures additively manufactured by Fused Filament Fabrication is presented. The novelty of the approach consists in accounting ... -
Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4
García Granada, Andrés Amador; Gómez Gras, Giovanni; Jerez Mesa, Ramón; Travieso Rodríguez, José Antonio; Reyes Pozo, Guillermo (2017-04-12)
Article
Accés obertBall-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the ... -
Experimental, computational, and dimensional analysis of the mechanical performance of fused filament fabrication parts
Rivet Fernández, Iván; Dialamishabankareh, Narges; Cervera Ruiz, Miguel; Chiumenti, Michele; Reyes Pozo, Guillermo; Pérez Martínez, Marco Antonio (Multidisciplinary Digital Publishing Institute (MDPI), 2021-06)
Article
Accés obertProcess parameters in Additive Manufacturing (AM) are key factors in the mechanical performance of 3D-printed parts. In order to study their effect, a three-zone model based on the printing pattern was developed. This ... -
Flexural properties and failure mechanism assessment for additive manufactured lom bars on different building orientations
Olivier, D.; Travieso Rodríguez, José Antonio; Borrós, S; Reyes Pozo, Guillermo (2011)
Comunicació de congrés
Accés obertPlastic Laminated Object Manufacturing has not been assessed from the flexural properties point of view. The deflection range in parts manufactured by this technique is wider than in parts fabricated by other additive ... -
Influence of building orientation on the flexural strength of laminated object manufacturing specimens
Olivier, Djamila; Travieso Rodríguez, José Antonio; Borrós Gómez, Salvador; Reyes Pozo, Guillermo; Jerez Mesa, Ramón (Springer, 2017)
Article
Accés obertThis study aims to define the best building orientation for components produced via the Laminated object manufacturing (LOM) technique to enhance their flexural performance. Results of previous research show that components ... -
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Domingo Espín, Miquel; Puigoriol Forcada, Josep M.; García Granada, Andrés Amador; Llumà Fuentes, Jordi; Borrós Gómez, Salvador; Reyes Pozo, Guillermo (2015-10-15)
Article
Accés restringit per política de l'editorialBuilding end-use functional parts with additive manufacturing (AM) technologies is a challenging task. Several factors influence their surface finish, dimensional accuracy, mechanical properties and cost. Their orientation ...