Ara es mostren els items 1-20 de 48

    • Analog Signal Adquisition and FFT Application for a Linux Embeded System Lab 

      Montes O'connor, Carlos Jesús (Universitat Politècnica de Catalunya, 2014-05)
      Projecte/Treball Final de Carrera
      Accés obert
      [ANGLÈS] The project goal is to design a platform based on an existing HW/SW embeded Linux system containing a FPGA, within an academic environment. To accomplish that objective, a specific application for signal Adquisition ...
    • Analysis of techniques for Linux kernel device driver programming 

      Martí Coll, Antoni (Universitat Politècnica de Catalunya, 2016-10)
      Projecte/Treball Final de Carrera
      Accés obert
      Analysis and usage of different techiques for driver delopment under Linux.
    • Artificial Intelligence applied to improve resilience in the inverse algorithms of Mars wind sensors 

      Boldú Nebot, Oriol (Universitat Politècnica de Catalunya, 2021-01)
      Treball Final de Grau
      Accés obert
      In recent years, the interest in Mars exploration has increased exponentially due to the attractive desire of setting up the first human settlements in the Red Planet. Great efforts are being made to characterise the ...
    • AtOx sensing using QCM for space missions 

      Tena Jiménez, Robert (Universitat Politècnica de Catalunya, 2023-07-03)
      Treball Final de Grau
      Accés restringit per acord de confidencialitat
      In various space missions, the influence of atomic oxygen (AtOx) has been detected as a harmful agent that can cause damage to satellites. In this TFG it is proposed as a solution to use Quartz Crystal Microbalances (QCM). ...
    • BLE connection 

      Martinez Gordi, Joan (Universitat Politècnica de Catalunya, 2018-02)
      Treball Final de Grau
      Accés obert
      Realitzat a/amb:   E.G.O Appliance Controls
      The purpose of this project is to supply to new induction cooking commercial generators a smart tool, which provide them of connectivity. Smart connectivity is implemented by the Bluetooth Communication module. First project ...
    • Comunicació de dades a través de línies de potència mitjançant un sistema basat en BeagleBone 

      Ortega César, Josep Maria (Universitat Politècnica de Catalunya, 2016)
      Projecte/Treball Final de Carrera
      Accés obert
      L’objectiu d’aquest projecte és dissenyar un sistema assequible però alhora altament personalitzable per poder ser utilitzat com a eina de laboratori per experimentar amb la comunicació entre dispositius a través d’una ...
    • Control electronics for Chemical sensors 

      Manyosa i Vilardell, Xavier (Universitat Politècnica de Catalunya, 2021-01)
      Treball Final de Grau
      Accés obert
      The objective of this thesis is to develop an electronic implementation of a surface potential control for gas metal oxides (MOX) sensors. To go after the objective of this project, a PCB has been designed and fabricated ...
    • Control electronics for Chemical sensors 

      Grau De La Mano, Joan (Universitat Politècnica de Catalunya, 2021-01-24)
      Treball Final de Grau
      Accés obert
      his project consists in the creation of a digital control for a chemical sensor in charge of reading the temperature and keeping it close to a specific temperature (threshold temperature). To keep aspecific value of the ...
    • Control electronics for heat flux measurement for planetary exploration 

      Ramon Canyameres, Pol (Universitat Politècnica de Catalunya, 2021-01)
      Treball Final de Grau
      Accés restringit per acord de confidencialitat
    • Control electronics for regolith sensors 

      Touriño Barreau, Andreas (Universitat Politècnica de Catalunya, 2022-07-07)
      Treball Final de Grau
      Accés obert
      One of the key geophysical measurements in planetary exploration is the heat exchange at the surface of the planetary regolith. The objective is the design and testing of electronics for measuring spectral thermal response. ...
    • Control of a heat flux sensor for the surface of the moon 

      LeitÃo Rodriguez, Eduardo E. (Universitat Politècnica de Catalunya, 2020-07)
      Projecte Final de Màster Oficial
      Accés restringit per decisió de l'autor
    • CTSU vs CTSU2 comparative 

      Tubert Comas, Nira (Universitat Politècnica de Catalunya, 2022-02-01)
      Treball Final de Grau
      Accés obert
      Realitzat a/amb:   E.G.O Appliance Controls
      The project consists of a comparative of two Capacitive Touch Sensing Units using a touch user interface. The first one (CTSU) is applied to an existing Renesas Xtreme Family (RX) microcontroller board. A new software has ...
    • Desarollo de sistemas embedded basados en Linux para aplicaciones radio streaming 

      Fernández Escuín, Carlos (Universitat Politècnica de Catalunya, 2009-09)
      Projecte/Treball Final de Carrera
      Accés obert
    • Desenvolupament del Software d'un canvi de marxes automàtic Shift by Wire 

      Batlle Martín, Josep M. (Universitat Politècnica de Catalunya, 2015-10-30)
      Projecte Final de Màster Oficial
      Accés restringit per acord de confidencialitat
      The objective of this project is to develop embedded software for an automatic gear shifter of an European vehicle manufacturer. The entire project is carried out in the division of Command and Control Systems of Ficosa, ...
    • Design of a dedicated cape board for an embedded system lab course using beaglebone 

      Pérez López, Raúl (Universitat Politècnica de Catalunya, 2014-05)
      Projecte Final de Màster Oficial
      Accés obert
      [ANGLÈS] This memory describes the design of an embedded system programming lab course for electronics engineering using BeagleBone board and a dedicated expansion board.
    • Design of algorithms for improving resilience of sensors in space exploration 

      Sheng, Yi (Universitat Politècnica de Catalunya, 2021-05-26)
      Projecte Final de Màster Oficial
      Accés obert
      The main goal of this thesis is to design and implement software, based on artificial neural networks, capable of predicting data values for failures in the wind sensor aboard NASA's rovers. To achieve this objective, it ...
    • Detection and analysis of atmospheric phenomena on Mars using data from NASA's InSight mission 

      Agraz Rodríguez, Óscar (Universitat Politècnica de Catalunya, 2020-08)
      Treball Final de Grau
      Accés obert
      The study of atmospheric phenomena on Mars advances in each new space mission carried out. Using probes equipped with high-precision sensors, the obtained data helps to discover new atmospheric behaviors and their ...
    • Dielectric charge control in contactless capacitive MEMS 

      Gorreta Mariné, Sergio (Universitat Politècnica de Catalunya, 2017-09-29)
      Tesi
      Accés obert
      Micro-Electro-Mechanical Systems, or MEMS, has been a continuously growing technology during the last decades. Since 1959, when the theoretical physicist Richard Feynman introduced the concept of nanotechnology in his ...
    • Diseño de interfaz entre una placa Beaglebone y periféricos mediante el bus GPMC 

      Suárez Vicente, Eugenia (Universitat Politècnica de Catalunya, 2016-05-31)
      Projecte Final de Màster Oficial
      Accés obert
      Desarrallo de una interfaz funcional entre un periférico de memoria externa y una Beaglebone mediante: Diseño hardware, para el elemento periférico y programación del driver GPMC, en el lado de la CPU para activar protocolos ...
    • Diseño de la electrónica de control para un anemómetro 3D indicado para aplicaciones de baja presión 

      Pla Parra, Joaquim (Universitat Politècnica de Catalunya, 2017-01)
      Treball Final de Grau
      Accés obert
      This project is based on the realization of an electronic control system for a spherical wind sensor for low pressure applications on Earth. The design was made following the line of thought used in the realization of the ...