Exploració per tema "Fabrication"

Ara es mostren els items 6-16 de 16

    • Feedback Formation: three teaching projects on robotically manipulated granular materials 

      Medina Ibáñez, Jesús; Jenny, David; Gramazio, Fabio; Kohler, Matthias (Grup per a la Innovació i la Logística Docent en l'Arquitectura (GILDA) / Universitat Politècnica de Catalunya. Iniciativa Digital Politècnica / Publicaciones y Divulgación Científica, Universidad de Málaga, 2020-11)
      Text en actes de congrés
      Accés obert
      En esta sección se presentan tres diferentes propuestas sobre fabricación robótica como procesos de diseño dinámico, estudiando la relación entre diseño computacional, fabricación digital y sistemas de materiales complejos ...

    • Hyper-connected hybrid educational models for distributed learning through prototyping 

      Chamorro Martin, Eduardo; Chadha, Kunaljit (Grup per a la Innovació i la Logística Docent en l'Arquitectura (GILDA) / Universitat Politècnica de Catalunya. Iniciativa Digital Politècnica, 2021-10-28)
      Text en actes de congrés
      Accés obert
      The emergence of virtual classrooms has deeply impacted and transformed the educational methodologies and protocols, in particular since the dawn of the COVID19 pandemic. This sudden change from on-campus to virtual learning ...

    • Integration of GMR sensors with different technologies 

      Cubells Beltrán, M. Dolores; Reig Escriva, Abilio Càndid; Madrenas Boadas, Jordi; De Marcellis, A.; Santos, Joana; Cardoso, Susana; Freitas, P.P. (2016-06-01)
      Article
      Accés obert
      Less than thirty years after the giant magnetoresistance (GMR) effect was described, GMR sensors are the preferred choice in many applications demanding the measurement of low magnetic fields in small volumes. This rapid ...

    • Macroporous silicon micro-nano structures for direct conversion of energy from light into chemical energy 

      Berenguel Costa, Guillem (Universitat Politècnica de Catalunya, 2021-07-05)
      Treball Final de Grau
      Accés restringit per decisió de l'autor

    • New privacy practices for blockchain software 

      Bellés Muñoz, Marta; Baylina Melé, Jordi; Daza Fernández, Vanesa; Muñoz Tapia, José Luis (2021-06-04)
      Article
      Accés obert
      The benefits of blockchain technologies for industrial applications are unquestionable. However, it is a considerable challenge to use a transparent system like blockchain and at the same time provide privacy to sensitive ...

    • Out of band improved performance into a measured 5G N77 band transversal filter 

      Udaondo Guerrero, Carlos; Collado Gómez, Juan Carlos; Mateu Mateu, Jordi; Perea Robles, Rafael; Yusud, Yazid; Giménez Bonastre, Alfred Raul; Aigner, Robert (Institute of Electrical and Electronics Engineers (IEEE), 2021)
      Text en actes de congrés
      Accés restringit per política de l'editorial
      Transversal networks for electroacoustic filters had been proposed and manufactured recently. One of the main problems that arose in the first prototype were the spurious modes due to the mirror stack of the Solidly Mounted ...

    • Physical simulator for colonoscopy: a modular design approach and clinical validation 

      Finocchiaro, Martina; Zabban, Clara; Huan, Yu; Mazzotta, Alessandro D.; Schostek, Sebastian; Casals Gelpí, Alicia; Hernansanz Prats, Alberto; Menciassi, Arianna; Arezzo, Alberto; Ciuti, Gastone (Institute of Electrical and Electronics Engineers (IEEE), 2023-01-01)
      Article
      Accés obert
      Simulators for gastrointestinal endoscopy offer the opportunity to train and assess clinicians’ skills in a low-risk and reliable environment. Physical simulators can enable a direct instrument-to-organ interaction not ...

    • Solución analítica para el problema de deformación plástica de un cuerpo cilíndrico 

      Travieso Rodríguez, José Antonio; González Rojas, Hernán Alberto (2009)
      Text en actes de congrés
      Accés obert
      En este artículo se relata la obtención de una solución para predecir la presión media hecha por una prensa en un proceso de recalcado de un cuerpo cilíndrico. La principal novedad en este trabajo es la consideración de ...

    • The use of rapid prototyping techniques (RPT) to manufacture micro channels suitable for high operation pressures and uPIV 

      Farré Lladós, Josep; Casals Terré, Jasmina; Voltas Aguilar, Jordi; Westerberg, Lars G. (2016)
      Article
      Accés obert
      This paper aims to present a new methodology to manufacture micro-channels suitable for high operating pressures and micro particle image velocimetry (µPIV) measurements using a rapid-prototyping high-resolution 3D printer. ...

    • Thermal activation of catalytic microjets in blood samples using microfluidic chips 

      Soler Turu, Lluís; Martinez Cisneros, Cynthia; Swiersy, Anka; Sanchez, Samuel; Schmidt, Oliver G. (2013-09-10)
      Article
      Accés obert
      We demonstrate that catalytic microjet engines can out-swim high complex media composed of red blood cells and serum. Despite the challenge presented by the high viscosity of the solution at room temperature, the catalytic ...

    • Vertically aligned ZnO nanorod array/CuO heterojunction for UV detector application 

      Vikas, L. S.; Sanal, K. C.; Jayaraj, M. K.; Antony, Aldrin; Puigdollers i González, Joaquim (2014-11-01)
      Article
      Accés restringit per política de l'editorial
      Vertically aligned ZnO nanorod array (ZNA) was deposited by electrodeposition technique over glass substrate coated with Al doped ZnO (AZO). The photo-luminescence spectrum of the ZNA showed a near band edge emission and ...